Each and every kitchen ought to have knives, even though storing them is often a problem. Knives in drawers dull simply from getting knocked around and pose danger to questing fingers. Butcher block knife holders are usually bulky and take up useful counter space. A single very simple and clever answer could be the magnetic knife rack. These racks screw into your wall above your workspace and hold the knives in simple reach however nonetheless out in the way. You needn’t purchase one of these racks; you are able to make a single at house.
Sand your wooden strip to create it smooth and cost-free of splinters. Use coarse sandpaper initially, wipe the wood down using a soft cloth and sand once again with fine paper. The finish should feel silky smooth. Your strip must be at least 1/2 inch thick and three inches wide.
Rub wood conditioner into your wooden strip with a soft cloth. Allow the conditioner to settle more than night. Wood conditioner seals the wood from moisture and rot.
Make marks about 1 inch apart at one particular end of the wooden strip using a pencil. Spot a level against each and every mark and extend them across the length with the strip. This marks exactly where your magnets will go.
Unroll and snip off as much magnet strip as you will need. For instance, a 3-foot wood strip demands about 68 inches of magnet, 34 inches for every single strip. Flip the magnets more than and peel away the adhesive film. Run a bead of hot glue over the very first strip, press it in location appropriate above your top pencil mark and repeat with all the subsequent strip.
Permit the glue to dry overnight for very best results. Spot the strip against your wall and drive screws via either end, in between the magnetic strips. Lay your knives against the magnets to retailer them.
- Idea for Making a Chain Choker (1.000)